Materials
- Bodies and nuts: CW 614 N as per UNI EN 12164
- Male inner contacts: CW 614 N as per UNI EN 12164
- Crimping ferrules: Soft copper
- Insulators: PTFE (Teflon)
- Gaskets: Silicone rubber
Finish
- Inner contacts: 5μ Ag min or 0,5μ Au
- Bodies: 3μ Ni
- Other metal parts: 3μ Ni
Mechanical
- Mating and dimensions: as per CECC 22120
- Contact captivation
- axial force: 15 N
- Engagement & Separation
- axial force: < 20 N
- torque (bayonet lock): 0,07 Nm ÷ 0,25 Nm
- Gauge retention force (resilient contact)
- centre contact: 57 gr. min
- outer contact: 225 gr. min.
- Tensile strenght of coupling: 445 N
Electrical
- Nominal impedance: 75 ohm
- Frequency range: up to 4 GHz up to 1 GHz
- Reflection factor:
- straight style: < 0,13 < 0,13
- right angle style: < 0,15 < 0,15
- Centre contact resistance: < 1,5 mohm (initial) < 2 mohm (after conditioning)
- Outer conductor continuity: < 1 mohm (initial) < 2 mohm (after conditioning)
- Insulation resistance: >5 Gohm (initial) < 200ohm (after conditioning)
- Working voltage (Vrms at 50 Hz): 400 V at sea level, 90 V at 20 Km altitude
- Dielectric withstanding voltage (Vrms at 50 Hz) 1000 V at sea level, 180 V at 20 Km altitude
Environmental
- Climatic category 55/155/21
- Operating temperature rating: -55°C ÷ + 155°C
- Corrosion (coupled connectors): Salt Mist Test as per IEC 68-2-11 Test ka
Endurance
- Mechanical: 500 operations min.
- High temperature: 155° C for 1000 h
Assembly
Pin: 1.2 mm sq
Outer: 3.25 mm hex
